TC-1
Transport Converters
TC-1 Stream Transport Stream Converter
The TC1 transport stream converter is designed to output DVB-S2 transponder content to a Gigabit Ethernet network, while simultaneously delivering metadata on signal quality, lock status, MODCODs (Modulation and Coding) and more, right alongside the main data payload. Its data path is implemented via FPGA (Field Programmable Gate Array), ensuring full transponder support, with minimal latency and zero PCR jitter.
The TC1 is highly suitable for a range of applications, including free-to-air TV, storage and archiving
(the product is supplied with AYECKA's TV archiving and transcoding software solutions), as well as HLS origin encoder feeds and monitoring systems. Its high rate link status-over-UDP feature also makes it an ideal match for antenna tracking and positioning solutions.
Product Highlights
-
Designed to deliver the highest efficiency for video transmission over satellite.
-
Based on the latest TC1ProX technology, and adds multiple ASI outputs, to support legacy IRD.
-
Outputs the video stream in parallel over ASI and as UDP stream.
Main Applications
-
Video Contribution.
-
Head end in the sky.
-
Video Monitoring.
Product Specifications
-
Modulation QPSK, 8PSK, 16APSK, 32APSK
-
Channel Rate up to 220 Mbps
-
Roll-off factors 0.2, 0.25, 0.35
-
Coding LDPC and BCH decoder as for DVB-S2 requirements
-
Code Rates ½, 3/5, 2/3, ¾, 4/5, 5/6, 8/9, 9/10
-
Framing DVB-S2 framing
-
MODES CCM, VCM, VCM *
-
Input Freq 950-2150MHz
-
Signal Level -35 to -75 dBm
-
Symbol Rates 400Ksps to 45 Msps (Low SR require PLL LNB)
-
Input connector Type F, 75 Ohms.
-
LNB power 14/18V, 22Khz, DiSEqC 2.
TC-1 Pro Demodulator for Signal Monitoring
AYECKA’s TC1 Pro is the ideal demodulator for signal monitoring, with full support for the DVB-S/S2 standards.
The converter is capable of locking onto to signals ranging from 100 Ksps to 67 Msps, and of transmitting transport streams or BBFrames (Baseband Frames) in their entirety, over UDP, to data processing systems.
The TC1Pro is optionally provided with BBFrame analysis software.
Product Highlights
-
GigE network interface.
-
Roll-off- S2 - Roll-off 0.35, 0.25, 0.20 and 0.15
-
Full L-Band, tuner. Tuner filter bandwidth control to cope with strong neighboring signals.
-
S2 profiles: – CCM, VCM including short frames + all MODCODs
-
Output BBFRAMEs over UDP.
-
Fully compliant with ESA L.3 protocol and wireshark GSE dissector.
-
Fast lock time.
-
Advanced lock and search modes a. L-Band frequency only b. L-Band + symbol rate c. Relock (no search).
-
500ma LNB power (support universal and professional LNB).
-
Network interface – GigE.
-
HPP for post demodulation processing such as MODCOD statistics gathering in real time, processing of non-standard BBF.
-
Compatible with AYECKA TC1 Analyzer software.
Main Applications
-
Video Monitoring.
-
Data Monitoring.
-
Spectrum Scanning Systems.
Product Specifications
Converter DVB-S/S2
Roll-off factors 0.15,0.2, 0.25,0.35
Signal Level -35 to -75 dBm
Symbol Rates 0.1Msps to 64Msps
Input connector Type F, 75 Ohms.
LNB power 14/18V, 22Khz, DiSEqC 2.0
Hardware processor
FPGA based
BBF over IP according to SatLab L.3Environmental Conditions
Operating Temp. 10° to 40° C.
Storage Temp. -25° to +85° C
Safety
CE or equivalent
EMI/EMC FCC part 15, Class A
Power
110-240 AC, 12W max
Control & Monitor
Serial port Serial over USB CLI
IP 10/100 BaseT interface
In band UDP over Gige commands to
CLI and SNMP
Traffic IP address Static or DHCP
Management IP setting – Static Physical Characteristics or DHCP
Detailed SNMP MIB
Upgrade
Software and Firmware are field- upgradeable
TFTP based
2 images saved in internal Flas
TC-1 Prox DVBS-2X Transport Stream Converter
The TC1ProX is our latest generation transport stream converter. The converter fully supports DVB-S, DVB-S2 and DVB-S2X standards, with symbol rates ranging from 100 Ksps to 500 Msps, and is ideally suited to applications requiring broad satellite signal monitoring capabilities.
Product Highlights
-
Full L-band tuner capable of rejecting strong neighboring signals.
-
Broadcast and Interactive DVB-S2X Profiles.
-
Full CCM, VCM, ACM standard compliance.
-
Roll Off down to 0.05 for DVB-S2X and 0.20 for DVB-S2.
-
NCR lock option including sliced signals (Annex M).
-
Full compliance ESA L.3 standard baseband frame output over GbE interface.
-
Fast lock time – power up to data output.
-
Advanced lock and search modes.
a. L-Band frequency only with auto symbol rate detection.
b. L-Band + symbol rate .
c. Relock (no search). -
DiSEqC 2.x, 500ma LNB power (support universal and professional LNB).
-
Compatible with AYECKA TC1 Analyzer software.
Main Applications
-
Video Monitoring.
-
Data Monitoring.
-
Spectrum Scanning Systems.
Product Specifications
Receiver
DVB-S/S2/S2X including Annex-M
Roll-off factors 0.05, 0.10, 0.15, 0.20, 0.25, 0.35
Signal Level -35 to -75 dBm
Symbol Rates 0.1Msps to 60Msps (500Msps optional)
Input connector Type F, 75 Ohms.
LNB power 14/18V, 22Khz, DiSEqC 2.0
Hardware processing
FPGA based
BBF over IP according to ESA L.3 standard
GbE Traffic Interface
Environmental Conditions
Operating Temp. 10° to 40° C.
Storage Temp. -25° to +70° C
Safety
CE or equivalent
EMI/EMC FCC part 15, Class A
Power
110-240 AC, 12W max
Control & Monitor
Serial port Serial over USB CLI
GbE interface
Menu based CLI and SNMP
Static IP address or DHCP
Upgrade
TFTP based SW and FW
2 images saved in internal Flash